Office wiring

[oh geez]

I have an odd post to make. I have two floating mounted corner cabinets beneath which lots of wiring goes under and up into. Anyone have any creative ideas on hiding (code friendly please) wiring. there is too much wiring on the floor to use those wire hiding tube-thingies plus two surge protector strips beneath each cabinet. Pictures if you can please!

 

[Geoff The Phantom Skier]

Office wiring

How about flexible tubing you can get at the hardware store? It's bigger than the stuff made for wires. You can cut a slit in it to run the cables through if the plugs won't fit too. Run that along the floor with the wires through it. That would look a lot neater and be safer, you would see the tube however.

Sorry no picture, but if I have time later I'll see if I can find a link.

 

[raymond]

Office wiring

Ok, so I found a link... affordable too:

http://www.homedepot.com/h_d1/N-5yc1vZ1xg3/R-100137132/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

 

[ilovejustinbieber(:]

Office wiring

They make something called a "spiral wrapping band" / "spiral protection hose" / "spiral wrap. I think I bought some at office depot or a hardware store once upon a time. The nice thing about it, is that you can wrap as thick of a set of wires as you like. It comes in clear too.

Here's a link so you can see how it wraps around cords. I know nothing of the company itself, but it should give you a good idea as to what you would be looking for. http://www.cabletiesandmore.com/SpiralWrap.php

The picture shows the wrap spread apart from itself. I always wrap it so you onlye see one "thick" cable and not all the colors coming through.

Hope this helps.